Expansion Options

117

Using a printer

time. You must reboot the computer for the settings to take effect.

HINT: When Auto-selected is the default, the computer can’t detect a PS/2 mouse if you connect it after booting the computer.

This can be changed in Toshiba Hardware Setup.

5Click OK.

A message appears stating “The changes will take effect next time the machine is rebooted. Reboot the machine now?”

6Click Yes.

The computer reboots, and the PS/2 mouse is activated.

Using a printer

Before you can connect a printer, you must determine whether it requires a parallel, serial, infrared, or a USB interface. Check the printer’s documentation. If you can configure the printer as either a serial or a parallel device, set it up for parallel operation.

You also need a suitable printer cable, which may have been provided with your printer. If not, your company may keep a stock of cables. Otherwise, you can purchase one from a computer or electronics store.

TECHNICAL NOTE: If your printer is ECP- or IEEE- compliant, make sure your printer cable is an IEEE 1284 cable.