8.Grasp the module by its edges and remove it from the computer.
If you use the computer for a long time, the memory modules and the circuits locating close to the memory modules will become hot. In this case, let them cool to room temperature before you replace them. Or you will get burnt if you touch any of them.
Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems.
Figure 3-15 Removing the memory module (R940)
2
1
3
1
1.Latches
9.Seat the memory module cover in place and secure it with the screw(s).
Take care to ensure that the memory module cover is firmly closed.
10.Install the battery pack.
11.Turn your computer over.
External monitor
An external analog monitor can be connected to the External RGB monitor port on the computer. To connect a monitor, follow the steps as detailed below:
Connecting the monitor cable
1.Connect the monitor cable to the External RGB monitor port.
User's Manual |
