Real Time Clock
Problem
The following message is displayed on the screen:
RTC battery is low. Check system. Then press [F2] key.
Your computer will automatically power off after 1 minute and the same message will appear again the next time when it is turned on.
Procedure
The charge in the Real Time Clock (RTC) battery has run out - you will need to set the date and time in the BIOS setup application by using the following steps:
1.Press and hold the F2 key, and then turn on the computer - the BIOS setup utility will load.
2.Set the date in the System Date field.
3.Set the time in the System Time field.
4.Press F10 - a confirmation message will be displayed.
5.Press the ENTER key - the BIOS setup application will end and the computer will restart.
Keyboard
Keyboard problems can be caused by the setup and configuration of the computer - please refer to the section The Keyboard in Chapter 3, Operating Basics, for further information.
Problem | Procedure |
Some letter keys | Check that the numeric keypad overlay is not |
produce numbers | activated - press the FN + F11 hot key and try |
| typing again. |
|
|
Output to screen is | Please refer to your software's documentation to |
garbled | ensure that it is not remapping the keyboard in any |
| way (remapping involves changing or reassigning |
| the function of each key). |
| If you are still unable to use the keyboard, you |
| should contact TOSHIBA Support. |
|
|
Internal display panel
Apparent computer's display panel problems may be related to the computer's setup and configuration - please refer to the HW Setup section in Chapter 4, Utilities & Advanced Usage, for further information.
User's Manual |
