![](/images/new-backgrounds/1228745/228745229x1.webp)
If you connect an eSATA device after the computer has already been turned on, it will take about ten seconds for it to be recognized by the computer. Do not attempt to disconnect and reconnect the drive before this period has elapsed.
Disconnecting an eSATA device
When you have finished using an eSATA device, you can follow the procedures below in order to disconnect it:
1.Wait for the indicator light of an eSATA device to go out to make sure all activity has stopped.
2.Click the Safely Remove Hardware and Eject Media icon on the Windows Taskbar.
3.Click an eSATA device that you want to remove.
4.Carefully pull an eSATA device's eSATA/USB combo connector out from within the computer's eSATA/USB combo port.
If you disconnect an eSATA device or turn off the power while the computer is accessing the drive you may lose data or damage an eSATA device or the drive.
TOSHIBA Hi-Speed Port Replicator II
In addition to the ports available on the computer, the TOSHIBA
The TOSHIBA
You must connect the AC adaptor before you connect to a TOSHIBA
When a TOSHIBA
When connecting an AC Adaptor to the TOSHIBA
When the replicator is docked, booting from USB 3.0 ports may be not available. To check whether your computer supports booting from USB 3.0, please contact TOSHIBA support for assistance.
Refer to the TOSHIBA
User's Manual |