Power and Power-Up Modes
Installing the battery pack
To install a battery, follow the steps below.
■The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements.
■Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch.
1.Insert the battery pack.
2.Ensure the battery lock is moved into its locked position.
2 | 3 |
1
1. Battery Lock | 3. Battery Release Latch |
2. Battery pack |
|
| Securing the battery pack |
Starting the computer by password
To start up the computer with the user password, follow these steps:
1.Turn on the power as described in Chapter 3, Getting Started. The following message appears:
Enter Password [ ]
At this point, the hotkeys FN + F1 to F9 do not work. They will function after you enter the password.
2.Enter the password.
3.Press ENTER.
If you enter the password incorrectly three times in a row, the computer shuts off. In this case, you must turn the computer back on to retry password entry.
User’s Manual |
