Toshiba TLP-ET1B, TLP-ET1E, TLP-ET1U owner manual Connection terminals

Preparations

Connection terminals

(2)

(3)

(1)

(4)

				(7)
			(6)	(5)
	Name	:	Function
(1)	COMPUTER terminal	:	Inputs RGB signals from a computer or other equipments.
(2)	Y, PB/CB, and PR/CR terminals :		Input component video signals (Y/PB/PR) from a video device.
(3)	SERVICE terminal	:	Leave this unconnected. Used for repair purposes.
(4)	S-VIDEO terminal	:	Inputs S-Video signals from a video device.
(5)	AUDIO terminal	:	Inputs audio signals from a computer or video device.
(6)	VIDEO terminal	:	Inputs video signals from a video device.
(7)	AV IN terminal*	:	Inputs audio and video signals from a video device. The AV IN terminal
			cannot receive S-Video signals.

Note

•Component video signals are abbreviated as Y/PB/PR in this manual. However, the projector supports signals from a video device whose output signals are represented as Y/CB/CR as well.

*Although the AV IN terminal is included in illustrations in this manual, the terminal exists only on the TLP-ET1B and TLP-ET1E. TLP-ET1U is not equipped with the AV IN terminal.

The AV IN terminal automatically identifies the RGB and composite signals. Check the setting on the connected device as well.

12