Toshiba TLP-ET1B, TLP-ET1E, TLP-ET1U owner manual Description Video S-video Y/P B/P R

Item Description Video S-video Y/PB/PR AV Computer

Auto setting	Adjust items, such as the sampling phase,
	depending on the type of input signal.	–	–	–	–	Yes
	Press the OK button.

Phase	Adjust with	and	to minimize flicker.	–	–	Yes	–	Yes
Frequency	Adjust with	and	to minimize periodic
	patterns and flickering when many vertical			–	–	–	–	Yes
	lines appear on the screen.
H-position	Adjust the horizontal position of the picture
	screen.			–	–	–	–	Yes
	Move left		Move right
V-position	Adjust the vertical position of the picture screen.			–	–	–	–	Yes
	Move up		Move down
Clamp	1) Press the OK button.

2)Use or to select Clamp 1 or 2. Clamp 1:

Adjust the position of the clamp pulse.		–	–	–	–	Yes
Down	Up
Clamp 2:
Adjust the width of the clamp pulse.
Shorter	Longer

Signal format Set the Y/PB/PR signal DTV format.

1)Press the OK button.

2)Select one from the displayed list with

	and , then press the OK button.
	Auto:
	Automatically identifies the type of input signal.	–	–	Yes	–	–
	If this fails, select one from the following:
	480i(525i)@60/480p(525p)@60/
	576i(625i)@50/576p(625p)@50/
	720p(750p)@60/720p(750p)@50/
	1080i(1125i)@60/1152i(1250i)@50/
	1035i(1125i)@60/1080i(1125i)@50
Video mode	Set the VIDEO and S-VIDEO color system.

1)Press the OK button.

2)Select one from the displayed list with

and , then press the OK button.	Yes	Yes	–	Yes	–
Auto:
Automatically identifies the type of input signal.
If this fails, select one from the following:
NTSC/PAL/SECAM/PAL-N/PAL-M/PAL60/NTSC4.43

Notes

•Items can be adjusted/set (marked with “Yes”) or cannot (marked with “–”) depending on each type of input.

•Pressing the EXIT button on the remote control dismisses the menu screen.

English

Maintenance Operations Preparations Before Using

Others

33