Computer System HyperTools | Tevion | |
|
|
|
5.3.3 Scheduling the Recording of a TV Program on HDD
Instead of using the One Touch Recording feature as explained above you may prefer to use Timer Recording, whereby you can schedule a program to be recorded at a particular point in time so that you can watch it latervia the HDD.
Warning: This will only work if the unit has the correct Date and Time (can and should be checked from time to time via Setup Menu – Date/Time). In particular, after a power failure, or after disconnecting the power cord from the DVR, the stored date resets itself to 01/01/08, which is most annoying and plays havoc with the recording schedule.
Since the DVR is not connected to the Internet (and no proper Electronic Program Guides are likely to be available anyway for the foreseeable future) we are forced to do the scheduling the
1.On TRC press the 
Power button to turn on the TV (if not already on).
2.On TRC press the 
button until 
2 is shown.
3.On DRC press the STANDBY/ON button to turn on the DVR and wait until “Hello” display on front panel has been replaced by “No disc” message shown on screen.
4.On DRC press the DVB button (once or twice) to show TV programs from digital channels.
5.On DRC press the TIMER button to enter the Timer Recording menu:
6.Use the Down Arrow button to move to the first blank line in the Timer Recording menu, then press the SELECT button and wait a few seconds for the Timer Recording Setup menu to appear:
F:\Our Files\Our Computers\User Guides\Tevion (Wintal)\Tevion | 18/9/08 at 21:49 | Page 20 |
