Computer System HyperTools | Tevion | |
|
|
|
5.3.7 Hiding Unwanted Segments from a TV Program Recorded on HDD
It is possible to hide unwanted segments, such as advertisements, from an existing HDD recording so that they are skipped during playback (or dubbing from HDD to DVD).
To define and mark a segment for hiding during playback, do the following:
1.On TRC press Power button to turn on the TV (if not already on).
2.On TRC pressed button until 2 is shown.
3.On DRC press STANDBY/ON button to turn on the DVR and wait until “Hello” display on front panel has been replaced by “No disc” message shown on screen.
4.On DRC press HDD button to show TV programs recorded on the Hard Disk.
5.On DRC use the Down Arrow or Up Arrow button to highlight the program for which you wish to do the segmentation:
6.On DRC press the Right Arrow button to display the HDD submenu:
7.Select the Segment option. The program automatically starts playing from the beginning, but you can use the playback navigation keys (NEXT, PREV, etc.) to move to anywhere within in the program. Try using the PAUSE/STEP button to advance one frame at a time.
8.Once you have arrived at the point in the program, where you wish to cut out a portion of the recording, press the SELECT button to mark the beginning of that segment. Watch as playback continues. When you have reached the point where you want the hidden segment to end, press the SELECT button again to mark the end of that segment.
9.In this manner you can define several undesirable segments within one program. The marked segments appear in Purple on the timeline and they will all be ignored on playback
10.To exit, press the HDD button one or more times.
Segmentation as described above is a little tedious and very
F:\Our Files\Our Computers\User Guides\Tevion (Wintal)\Tevion | 18/9/08 at 21:49 | Page 25 |