Trane CAH-SVX01A-EN, Custom Climate Changer Air Handlers Installation, Apply 1.25-inchx 0.33-inch

Installation

• Apply 1.25-inch x 0.33-inch	• Move the next unit section as
ribbed butyl tape to the shipping	close as possible from the
split channel and shipping split	previous section. The two
plates (see Figure 11).	sections should be close enough
• Verify the section is level prior to	to reduce the amount of

proceeding with the next section	dragging required. This is
	particularly important when
of the unit.
	mounting on a roof curb to
	minimize damage to the sealant
	on the roof curb. Alignment of
	sections must be completed
	before drawing sections
	together.
	• Remove the bottom bolts from
	the shipping split lifting lugs (see
	Figure 12).
Figure 11. Apply butyl tape to shipping splits

18

Figure 12. Remove bottom bolts from lifting lugs

CAH-SVX01A-EN