Installation
Figure 44. Junction box mounting and wiring details
Valve jack wiring:
.Black connector is for 24 Vac power supply (black wire for GND and red wire for 24 Vac)
.White connector is for 0 to 10 Vac analog signal (black wire for GND and red wire for 0 to 10 Vac.
Figure 45. Typical quick connects with wiring identification
Power 24 Vac
Sig.
Wire from | Signal to Slave | Actuator | |
ribbon cable | |||
Actuator | |||
| |||
|
|
External Insulating Requirements
The following areas should be specifically addressed, as applicable:
•Supply and return water piping connections
•Supply and return refrigerant piping connections
•Condensate drain lines and connections
•
•Discharge duct connections
•Special requirements for low-
42 |
|
