Trane TR200, BACnet Option Module Parameters, Address, Baud Rate, Parity / Stop Bits

			Parameters
		device may have. Please see separate manual TR200 MetasysMG.
		12.NX.YY.
[4]
[9]	FC Option	To be used when a gateway is connected to the integrated RS 485 port,
		e.g., the BACnet gateway.
		The following changes will take place:
		-The address for the adjustable frequency drive port will be set to 1 and
		par.8-31Address, is now used to set the address for the gateway on the
		network, e.g., BACnet.
		-Baud rate for the Drive port will be set to a fixed value (115,200 Baud)
		and par.8-32 Baud Rate is now used to set the baud rate for the network
		port (e.g., BACnet) on the gateway.
[20]

NOTE: Further details can be found in the Metasys manual.

8-31 Address

Range:	Function:
1. N/A* [1. - 126. N/A]	Enter the address for the adjustable frequency drive (standard) port.
	Valid range: 1–126.

8-32 Baud Rate

Option:	Function:
	Baud rate selection depends on Protocol selection in par.8-30Protocol.
[0]	2400 Baud
[1]	4800 Baud
[2]	9600 Baud
[3]	19200 Baud
[4] *	38400 Baud
[5]	57600 Baud
[6]	76800 Baud
[7]	115200 Baud

Default refers to the FC Protocol.

8-33 Parity / Stop Bits

Option:Function:

Parity and Stop Bits for the protocol par.8-30Protocol using the Adjust- able Frequency Drive Port. For some of the protocols, not all options will be visible. Default depends on the protocol selected.

[0]* Even Parity, 1 Stop Bit

[1]Odd Parity, 1 Stop Bit

[2]No Parity, 1 Stop Bit

[3]No Parity, 2 Stop Bits

TR200 BACnet 6-5