Trane BACnet Option Module Minimum Response Delay, Max Response Delay, Max Inter-Char Delay

Parameters

8-35 Minimum Response Delay

Range:	Function:
10. ms* [5. - 10000. ms]	Specify the minimum delay time between receiving a request and trans-
	mitting a response. This is used for overcoming modem turnaround
	delays.

8-36 Max Response Delay

Range:	Function:
10001. [11. - 10001. ms]	Specify the maximum permissible delay time between transmitting a re-
ms*	quest and receiving a response. Exceeding this delay time will cause
	control word timeout.

8-37 Max Inter-Char Delay

Range:	Function:
25.00 [0.00 - 35.00 ms]	Specify the maximum permissible time interval between receiving two
ms*	bytes. This parameter activates timeout if transmission is interrupted.

8-50	Coasting Select
Option:		Function:
		Select control of the coasting function via the terminals (digital input)
		and/or via the bus.
[0]	Digital input	Activates Start command via a digital input.
[1]	Bus	Activates Start command via the serial communication port or serial
		communication option.
[2]	Logic AND	Activates Start command via the serial communication bus/serial com-
		munication port, AND additionally via one of the digital inputs.
[3] *	Logic OR	Activates Start command via the serial communication bus/serial com-
		munication port OR via one of the digital inputs.

NOTE: This parameter is active only when par.8-01Control Site is set to [0] Digital and control word.

8-52 DC Brake Select

Option:		Function:
		Select control of the DC brake via the terminals (digital input) and/or via
		the serial communication bus.
[0]	Digital input	Activates Start command via a digital input.
[1]	Bus	Activates Start command via the serial communication port or serial
		communication option.
[2]	Logic AND	Activates Start command via the serial communication bus/serial com-
		munication port, AND additionally via one of the digital inputs.
[3] *	Logic OR	Activates Start command via the serial communication bus/serial com-
		munication port OR via one of the digital inputs.

NOTE: This parameter is active only when par.8-01Control Site is set to [0] Digital and control word.

6-6 TR200 BACnet