Tunturi R60 owner manual

GB
3
OWNER'S MANUAL • R60
the purchase. Registering will extend
the warranty in home use. Further
information on warranty terms can be
found in the warranty booklet included
with the product. Please note that the
warranty does not cover damage due to
shipping or negligence of adjustment or
maintenance instructions described in
this manual.
• The equipment must not be used by
persons weighing over 135 kg.
• Do not attempt any servicing or
adjustments other than those described
in this guide. Everything else must
be left to someone familiar with the
maintenance of electromechanical
equipments and authorised under the
laws of the country in question to carry
out maintenance and repair work.
SAVE THIS INSTRUCTION MANUAL
WELCOME TO THE WORLD OF TUNTURI
EXERCISING!
Your choice shows that you really want to invest in
your well being and condition; it also shows you
really value high quality and style. With Tunturi
Fitness Equipment, you’ve chosen a high quality,
safe and motivating product as your training
partner. Whatever your goal in training, we are
certain this is the training equipment to get you
there. You’ll find information about using your
exercise equipment and what makes for efficient
training at Tunturi’s website at WWW.TUNTURI.COM.
ASSEMBLY
The rowing machine is shipped in the locked
storage position. Unlock the front tube’s latch
under the seat and push the seat back. Push the
front tube folded on the frame up and forward.
Pull the locking pin up and press the front frame
downward simultaneously by the pulley wheel
cover. Release the locking pin and ensure that
the front frame is in locked forward position.
Always tighten the locking pin before you begin to
exercise.
CONSOLE
Turn the console carefully away from the front
frame so that you can remove the battery
compartment cover in the back of the console.
Open the battery compartment cover carefully
from its lower edge. Press in the tab at the bottom
of the cover to unlock it, then lift the cover up. Be
careful not to damage the wires. Set the batteries
(4 x C) in their place according to the markings
in the battery compartment. Reattach the cover
and adjust the angle of the console appropriately
for exercise. The clock in the console uses always
batteries, even when the device is not connected to
any power source. Otherwise the clock would reset
to zero.
Adjust the console so that it is in an appropriate
angle for excercise.
TRANSFORMER
Connect the transformer power cord to a
receptacle. Connect the transformer connector
to the plug in the front frame. Always disconnect
the power cord from the device and the receptacle
after you finish. NOTE! Always remove the mains
cable from the fitness equipment first, and only
then remove it from the power source. Always
connect the mains cable to the power source first,
and only then connect it to the fitness equipment.
Inverted order resets the meter clock display.
Make sure the power cord does not run underneath
the equipment.
R60.indd 3R60.indd 3 2.3.2006 17:22:062.3.2006 17:22:06