Tyan Computer B4985F48V8HR (Tower), Transport FT48 manual Installing the LCM Kit Option

2.6Installing the LCM Kit (Option)

To install a LCM kit, you need to remove all the fans, fan cra- dle, and unfasten an empty drive bracket from the chassis first. Refer to the first four steps given in “2.5 Installing the Floppy Disk Drive (Option)”. Then, do the following:

1. Install the LCD module as shown.

2.Connect the following cables to the M1000 LCD module as shown.

a.4-pin power supply cable to M1000 J6 connector.

b.LCD cable to M1000 J3 2x3 pin connector.

NOTE: M1000 pin 2-3 of JP1 and JP2 should be closed.

(a)

(b)

Chapter 2: Setting Up 39