Tyan Computer B4985F48V8HR (Rackmount), Transport FT48 manual Removing the Front Door Assembly

3.4Removing the Front Door Assembly

A door is supplied with the FT48-B4985 that can be used when the unit is rack mounted or standalone. Follow these instructions to remove the door.

1.Pull out the four fixing bars locking the door assembly onto the server.

2.Remove the door assembly from the four holes located on the lower edge of the server.

To replace the door assembly:

1.Tilt the door assembly and fit the four protruding tips into the holes located on the lower edge of the server.

2.Place the door assembly in place and make sure that the four fixing bars are locked onto the server.

Chapter 3: Replacing Pre-installed Components 59