Safety Information

Before installing and using the FT48-B4985, take note of the following precautions:

Read all instructions carefully.

Do not place the unit on an unstable surface, cart, or stand.

Do not block the slots or openings on the unit which are provided for ventilation.

Only use the power source indicated on the marking label. If you are not sure about your power source, contact the power company.

The unit uses a three-wire grounded cable, which is sup-

plied with a third pin to ground the unit and prevent electric shock. Do not defeat the purpose of this pin. If your outlet does not support this type of plug, contact an electrician to replace the obsolete outlet.

Do not place anything on the power cord. Place the power cord where it will not be stepped on.

Follow all warnings and cautions in this manual and on the unit case.

Do not push objects in the ventilation slots, as they may

touch high voltage components and result in shock and damage to the components.

When replacing parts, ensure that you use parts specified by the manufacturer.

When service or repairs have been carried out, perform

routine safety checks to verify that the system is operating correctly.

Avoid using the system near water, in direct sunlight, or near a heating device.

Cover the unit when not in use.

Disassembly of this unit should not be attempted by unqualified persons. When the chassis cover is removed there is a danger of electric shock and risk of damage to the system.

Do not attempt to lift or move this product alone. When moving this product, at least two people should lift it onto a suitable trolley or cart. When bolting the product into a rack, two people should hold the device in place while a third person bolts the device securely to the rack.

iv

Page 6
Image 6
Tyan Computer Transport FT48, B4985F48V8HR (Rackmount), B4985F48V8HR (Tower) manual Safety Information