Universal Laser Systems X-600, X2-600 manual Passing Through a Narrow Doorway

Installation 2-5

FRONT VIEW

Y-PIPE

FROM EXHAUST BLOWER

REDUCE TO 4 INCHES WITH A REDUCING COUPLER

SHUT OFF	SHUT OFF
GATE	GATE

4 INCH DIAMETER

FLEXIBLE RUBBER HOSE

Passing Through a Narrow

Doorway

If the doorway is not wide enough to allow to you roll the laser system through it, the system MUST be detached from the Cart Stand, rotated sideways, passed through the doorway, then re-attached to the Cart Stand. If your doorway is wide enough, you can skip the following procedure and proceed to “Leveling the System”.

The Laser System can weight up to 250 lbs. Obtain assistance from as many people as possible (3 or 4 people). Always use a back-support device. Do not attempt lifting the machine if you are physically handicapped or are injured in any way. Seek the advice of a physician if you are unsure.

It would help if you had a PADDED floor dolly to transport the machine through the doorway. If one is not available, it will need to be carried through the doorway.

1.Open the Rear Cover by pressing down on the button part of the latches until the latches pop up.

2.Fold the Rear Cover down to a resting position.