Vermont Casting DVRT36, DVRT43, DVRT39 manual Inspecting the Venting System, 10002428

Vermont Castings, Majestic Products DVRT36/39/43

3/8" - 1/2"
	SIT Pilot
	PSE Pilot
	3/8"-1/2"
	Electronic
	Ignition
	F584-703/
	FP1370
Fig. 48	Correct pilot flame appearance.

Glowing Lava Rock

LG231

Fig. 51 Correct burner flame appearance for DVRT43.

NOTE: Glowing lava rock for DVRT36, DVRT39 and DVRT43 is only allowed to be positioned at the front area (radiant portion) of the burner housing assembly.

5 Separate flames

Glowing Lava Rock

LG229

Fig. 49 Correct burner flame appearance for DVRT36.

5 Flame areas

Inspecting the Venting System

This appliance venting system is designed and constructed to develop a positive flow adequate to remove flue gases to the outside atmosphere.

Any foreign objects in the venting system, except those designed specifically for the venting system, may cause spillage of flue gases.

To inspect the venting system, make sure the main gas valve is off. Remove the window frame assembly. (Refer to Window Frame Assembly Removal section.) Using a flashlight, check the area above the baffle in the combustion dome. Clean if necessary.

Glowing Lava Rock

LG230

Fig. 50 Correct burner flame appearance for DVRT39.

28 10002428