GCA70-314

Using The Other Features

7.7Setting A Do Not Disturb Condition At Your Station

To enable DND,

1.Press preprogrammed DND button. The light associated with the DND button turns on when the feature is active.

To disable the DND condition,

1.Press preprogrammed DND button. The light associated with the DND button turns off when the feature is disabled.

To set a Do Not Disturb condition at your telephone when a call rings at your station,

1.Hear ringing.

2.Press DND button. Ringing will stop, caller will hear the Do Not Disturb tone, and your telephone will remain in DND until you disable the feature (described above).

7.8Overriding A Call Or A Do Not Disturb Condition At Another Telephone (Executive Override)

To override an in-progress call or a Do Not Disturb condition at another telephone,

1.Make intercom call and hear a busy signal.

2.Dial 03 (all parties will hear several tone bursts).

3.Speak your announcement (if in voice-first mode) or hear ring-back tone (if in tone-first mode).

NOTE: This action disables DND condition at the other telephone until the user at that station resets DND.

Non-LCD Station User's Guide 7–5

Page 35
Image 35
Vertical Communications FX, DXP Plus manual Setting a Do Not Disturb Condition At Your Station, ∙ To enable DND