Vertical Communications GCA70-313 manual Volume Control, Setting Current Volume Level

Other Advanced Features GCA70-313

Volume Control

Setting Current Volume Level

The volume control on your telephone is a multipurpose control you can use to set the volume (loudness) of the ringer, the speaker, the handset, the headset, back- ground music, and the group listening mode.

￿There are four ringer loudness levels (plus an off position). Set these levels as follows:

1.While your telephone is on-hook and idle, PRESS the VOLUME UP OR VOLUME DOWN button once for each change in loudness you desire. The ringer sounds once for each change as an example of the current setting. (On the 8112N, the ringer volume is controlled by a three position switch on the bottom of the telephone.)

Impact SCS Volume Buttons

NOTE: If you set the ringer to the a short ring burst once for each call ringer is off.

OFF position, your telephone will sound you receive at your station while the

￿There are eight speaker loudness levels. Set these levels for the current call as follows:

1.While on a call and in station mode, PRESS the VOLUME UP OR VOLUME DOWN button once for each change in loudness that you desire.

￿There are at least eight handset loudness levels that you can set for the current call as follows (not available on 8112N):

1.While on a call and in handset mode, PRESS the VOLUME UP OR VOLUME DOWN button once for each change in loudness that you desire.

66 Non-LCD Station User’s Guide