Vertical Communications GCA70-313 manual Your Station’s Display Lights, Next to a line button

Getting Started GCA70-313

Your Station’s Display Lights

The lights (LEDs) on your LCD speakerphone indicate the status of lines, features, and intercoms.

Busy Lamp Field (BLF) lights (next to a Direct Station Select/Busy Lamp Field or DSS/BLF programmable button):

￿Steady red = station is in use.

￿Flashing red = station is receiving a call.

￿Winking/Fluttering red = message-waiting light set for you by station associated with that DSS button.

Next to a line button:

￿Steady green = this is your line, either on-hook (in a handsfree mode) or off-hook, when the line is active.

￿Steady red = another station is using this line.

￿Flashing red = a call is coming in on this line.

￿Flashing orange = this line will be answered when you lift the handset.

￿Winking green = your line is on hold.

￿Winking red = the call has been placed on hold by another station.

￿Fluttering orange or green = your line has recalled from hold.

￿Fluttering red = the line put on hold by another station has recalled.

NOTE: You can find the programmable buttons that the installer designates line buttons in the same location as the DSS/BLF buttons. Ensure that these buttons are labeled correctly to indicate their unique features.

Next to a fixed feature or programmable feature button:

￿Steady red = the feature is on.

￿Steady off = the feature is off.

NOTE: You can find the programmable buttons that the installer designates feature buttons through user programming in the same location as the DSS/BLF programmable buttons. Ensure that these buttons are labeled cor- rectly to indicate their unique features.

Above the MUTE button:

￿On steady = called party cannot hear your conversation.

10 Non-LCD Station User’s Guide