Vertical Communications GCA70-313 Setting a Personal Ringing Tone, Setting Volume Levels, Dial

GCA70-313 Getting Started

Setting a Personal Ringing Tone

You can choose one of eight different ring tones for your telephone. Often, when several telephones are located close together, each user chooses a different personal ring tone.

￿To select one of the ring tones, proceed as follows:

1.PRESS INTERCOM.

2.DIAL ￿￿￿.

3.DIAL number ( ￿ to ￿) to select ring tone.

4.The next time your telephone rings, you will hear the new ring tone.

Setting Volume Levels

The volume control on your telephone is a multi- purpose control you use to set the volume (loud- ness) of the ringer, the speaker, and the handset.

￿ To set the ringer loudness level,

1. While your telephone is on-hook and
idle, PRESS the VOLUME UP OR
VOLUME DOWN button once for each
change in loudness you desire. The
ringer sounds once for each change as	Impact SCS Volume Buttons
an example of the current setting.

NOTE: If you set the ringer to the “off” position, your telephone will sound a short ring burst once for each call you receive at your station.

NOTE: On the 8112N, the ringer volume is controlled by a three-position switch on the bottom of the telephone. There is no handset volume control.

Non-LCD Station User’s Guide 3