4VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE

WHAT YOU NEED

An IBM-compatible Pentium PC with:

A CD-ROM drive

An available Universal Serial Bus (USB) port; 1.1 or 2.0

Microsoft Windows operating system: 98SE, 2000, ME, or XP

Available internal memory (RAM) as follows:

64 MB or more

128 MB recommended for Windows XP

200 MB of free hard disk space

Note: The new USB 2.0 ports operate at higher speeds than USB 1.1 ports. If your computer is not equipped with USB 2.0 ports, you can add them with the Visioneer Hi-Speed USB 2.0 PCI Card. Visit the Visioneer Web site at www.visioneer.com for ordering information, or contact the dealer where you purchased your Visioneer 9120 OneTouch USB scanner. However, you do not have to add USB 2.0 ports to the computer. Your scanner automatically works with both USB 1.1 and USB 2.0 ports.

A VGA or SVGA Monitor

Recommended settings for your monitor are as many colors as possible—High Color (16-bit), True Color (24-bit or 32-bit). Set the resolution to at least 800 by 600 pixels.

To set your monitor’s colors and resolution, open the Windows Control

Panel, double-click Display, and then click the Settings tab.

Page 8
Image 8
Visioneer 9120 manual What YOU Need, An IBM-compatible Pentium PC with, VGA or Svga Monitor