Item | LED status | Description |
|
|
|
LED1 and LED2 blink alternately by 150ms | During the test | |
|
|
|
| LED1 blinks one time and LED2 blinks 3 times | TM1302 test fail |
|
|
|
| LED1 blinks one time and LED2 blinks 4 times | RTL8100BL test |
|
| fail |
|
|
|
Network | LED1 off, LED2 off | Network fail |
|
|
|
| LED1 blink every 0.5 second, LED2 off | Network normal, |
|
| Heartbeat |
|
|
|
Camera control | LED2 blink every 1 second | Get the control |
|
| message |
|
|
|
BNC video inputs
Video Server allows up to four cameras attached at the same time. To ensure video modulation type being detected correctly, cameras should be attached sequentially from “VIDEO1” to “VIDEO4” and powered on before Video Server is powered on.
DIP switches “1” to “4”
There are four DIP switches numbered from “1” to “4” in the front panel regarding of each video input. They are used to enable the
Auxiliary button “RESET”
There is a button located at the left of “VIDEO4” in the front panel. Refer to the Appendix Troubleshooting for the detailed usage of system recovery.
- 9 -
www.vivotek.com
