VTech DS6321-3, DS6321-2 Expand your telephone system, Add and register a handset optional

Appendix

Expand your telephone system

The handsets provided with your telephone system are pre-registered. Additional handsets registered to the telephone system are assigned in sequential order. For instance, if you already have HANDSET 1 and HANDSET 2, the new registered handset is assigned HANDSET 3. This telephone system accommodates up to 12 handsets.

Add and register a handset (optional)

You can add new handsets (DS6301, purchased separately) to your telephone system, but each handset must be registered with the telephone base before use. When first purchased, each expansion handset shows

Press and hold FIND HANDSET on base for 4 sec, then press # on handset after a battery is installed. You may need to charge the handset before registering to the telephone base. For more details on battery charging, see the table on page 5.

To register a handset:

1.Press and hold /FIND HANDSET on the telephone base for about four seconds until the red IN USE light turns on.

2.Press # on the handset. Its screen shows Registering...Please wait and it takes up to 60 seconds to complete the registration. The handset shows HANDSET X Registered (X represents the handset number assigned) and you hear a beep when the registration is completed.

• If the registration fails, the handset shows Registration failed for a few seconds and then Press and hold FIND HANDSET on base for 4 sec, then press # on handset. Try the registration process again.

• You cannot register a handset if any other system handset is in use.

75