VTech DS6322-3, DS6321-2 Intercom, To initiate an intercom call, To silence an intercom call

Telephone operation

Intercom

Use the intercom feature for conversations between two system handsets.

You can buy additional expansion handsets (DS6301) for this telephone system. You can register up to 12 handsets to the telephone base.

To initiate an intercom call:
1. Press MENU/SELECT on the handset when it is not
	Ans. system
in use.	Directory
2. Press or to highlight Intercom, then press	Call log
	Intercom
MENU/SELECT.
	Bluetooth
• If you have a two-handset system, your handset
displays Calling other handset. The destination
handset rings and displays Handset X is calling.		INTERCOM TO:
• If you have more than two handsets, your handset	Handset 2
displays INTERCOM TO: and a list of registered	Handset 3
handsets. Press or to select a destination	Handset 4
handset and then press MENU/SELECT. Your	Handset 5
handset displays Calling Handset X. The
destination rings and displays Handset X is calling.

To answer an intercom at the destination handset:

•Press /HOME/FLASH or . Both screens show Intercom.

To silence an intercom call:

•Press OFF/CLEAR or MUTE/REMOVE on the destination handset. Its screen displays Ringer mute for a few seconds.

To end an intercom call:

•Press OFF/CLEAR or place either handset back in the telephone base or charger. Both handsets display Intercom ended.

• You can cancel the intercom call before it is answered by pressing OFF/CLEAR on your originating handset.

•If the destination handset does not answer the intercom call within 100 seconds, is in the directory or call log, or is out of range, the originating handset displays Unable to call try again and returns to idle mode.

•You can use a maximum of five handsets at a time. For example, when four handsets are used on intercom calls, use another handset for an outside call. When two handsets are used on an intercom call, you can use three other handsets for an outside call.

48