Wacom PL-521, DTF-521 manual Adjusting pitch and phase

DTF521_Manual.fm Page 27 Tuesday, February 28, 2006 10:36 AM

Adjusting pitch and phase

Some computers and video cards may not allow the auto-sync function to fully work when the DTF-521/PL-521 is first connected. If some portion of text appears blurred, adjust pitch and phase by following the procedure below. For crisp images, set the resolution of your video card to 1024 x 768.

•In the Pen Tablet control panel, select the CALIBRATE tab.

•If you are working with multiple displays, be sure the display corresponding to the DTF-521/PL-521 is selected in the MONITOR menu.

•Click on the CALIBRATE... button to activate the calibration screen.

•Using the OSD controls, open the OSD menu and select the PITCH icon. Then adjust the pitch level so that the pattern of fine vertical stripes displays evenly. (For details on changing the OSD settings, see Working with on screen display settings on page 24.)

•In the OSD menu, select the PHASE icon. Adjust the phase level so that the adjustment pattern shows clearly.

•After completing these adjustments, press the ENTER and MENU buttons to exit the OSD menu.

Click on the CANCEL button or press ESC to exit the calibration screen.

Adjustment pattern for pitch and phase.

Customizing page 27