DTF521_Manual.fm Page 40 Tuesday, February 28, 2006 10:36 AM
APPENDIX
Caring for your pen display
Keep the pen and your pen display LCD screen surface clean. Dust and dirt particles can stick to the pen and cause wear to the display screen surface. Regular cleaning will help prolong the life of your LCD screen surface and pen. Keep the pen display and pen in a clean, dry place and avoid extremes in temperature. Room temperature is best. The
Cleaning
To clean the pen display casing or the pen, use a soft, damp cloth; you can also dampen the cloth using a very mild soap diluted with water. Do not use paint thinner, benzine, alcohol, or other solvents to clean the unit casing or pen.
To clean the display screen, use an
Replacing the pen tip
The pen tip (nib) will wear with normal use. When the nib gets too short or develops a sharp edge, you can replace it with one of the extra nibs that came with the pen.
To remove the old nib:
Clasp it with a pair of tweezers,
To insert a new nib:
Slide it straight into the barrel of the pen. Firmly push the nib until it stops. The new nib will slide into the correct position.
WARNING Prevent children from swallowing the pen tip or side switch. The pen tip (nib)
or side switch may accidentally be pulled out if children are biting on them.
If the pen nib wears and becomes angular, it may damage the coating on the
Important: When the pen is not in use, place it in the pen tray, the pen storage compartment, or lay it flat on your desk. To maintain the sensitivity of your pen, do not store the tool in a container where it will rest on its tip.
Appendix page 40