Waterford Appliances E65-NG1, E65-LP1 installation manual Alternate Horizontal Termination Caps

INSTALLATION

You will require the following components with your new Emerald Direct Vent Freestanding Gas Stove. Please review your product to make sure you have everything you need. In the event that you are missing any part, contact your dealer.

Note: These are the minimum pieces required. Other parts may be re- quired for your particular installa- tion. See page 17 for a list of vent parts.

If installing termination on a siding covered wall, a vinyl siding standoff or furring strips can be used in order to ensure that the termination is not recessed into siding.

The vinyl siding standoff is required for walls with vinyl siding.

Minimum components for a Dura-Vent Horizontal Installation:

A)Dura-Vent Horizontal Termination Kit

B)Wall Thimble (required for combustible walls)

Minimum components for a Dura-Vent Vertical Termination:

D)Dura-Vent Vertical Termination Kit. See page 17 for pipe lengths.

Dura-Vent Basic Horizontal Kit # 970

1 90o Elbow

1Wall Thimble Cover

1Horiz. Sq. Term. Cap

Alternate

Horizontal

Termination Caps

When using piping other than Simpson Dura-Vent, 3 screws must be used to secure rigid pipe to adaptor.

The FPI AstroCapTM and FPI Riser Vent terminal is certified for installations using FPI venting systems as well as Simpson Dura-Vent®, Direct Vent GS, American Metal Products, Ameri Vent Direct vent and Selkirk Direct-Temp. FPITM, and FPI AstroCapTM are the proprietary trademarks of FPI Fireplace Products International Ltd. Dura-Vent® and Direct Vent GS are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.

WARNING:

Do not combine venting components from different venting systems.

However use of the the AstroCapTM and FPI Riser is acceptable with all systems.

This product has been evaluated by Intertek for using a Dura-Vent Flue Adaptor in conjunction with Selkirk Direct-Temp and Ameri Vent Direct venting systems. Use of these systems with the Direct Vent GS starting collar is deemed acceptable and does not affect the Intertek WHI listing of components.

18 Waterford E65-1 Emerald Direct Vent Freestanding Gas Stove