DRIVE CONTROLS
10A. BATTERY CHARGE LEVEL INDICATOR-BASIC
Indicates the charge level of the batteries.
The meter display is divided into 10 vertical bars. Bars illuminated on the far right indicate full charge. Bars flashing near the left side indicate the batteries should be recharged. Further operation of the machine could damage the machine or the batteries.
When the machine is left overnight with less than a full charge, the display may initially indicate a full charge. It will also indicate a full charge if the batteries are disconnected, then reconnected. After a few minutes of operation the meter will give the correct charge level.
10B. BATTERY CHARGE LEVEL INDICATOR-DELUXE
The battery meter can be viewed at the left side of either information screen 1 or information screen 2. The level of battery charge is indicated by the horizontal bars in the battery meter box. When the batteries require charging, the icon will flash and a battery inhibit icon will appear on the right side of either information screen. Scrub and solution functions that are running when the battery inhibit icon appears will be automatically shut off. It is not possible to restart scrub functions while the battery inhibit is displayed. The controller reserves enough battery charge to allow
11A. HOUR METER-BASIC
Records the number of hours the machine has been in operation. This information is useful in determining when to service the machine.
11B. HOUR METER-DELUXE
Brush Run Time:
Records the time spent with the brushes running and gives true brush motor time.
Traction Motor Time:
Records the time spent propelling the machine and gives true traction motor time.
86037660 CHARIOT 11/09/06 |
