Windster 100 Before You Begin

12 Dell PowerApp 100 Appliances Rack Installation Guide

Before You Begin

Before you begin installing your PowerApp system in the rack, carefully read “Safety

Instructions,” found earlier in this guide.

NOTICE: This rack kit is intended to be installed in a Dell rack by trained

service technicians. If you install the kit in any other rack, be sure that the

rack meets the specifications of American National Standards Institute

(ANSI)/Electronic Industries Association (EIA) standard ANSI/EIA-310-D-92,

International Electrotechnical Commission (IEC) 297, and Deutsche Indus-

trie Norm (DIN) 41494. One rack kit is required for each Dell server or

storage system that is installed in a rack.

cable-management arm assembly

slide assemblies with

mounting brackets (1 pair)

10-32 x 0.5-inch

pan-head Phillips

screws (4)

1-U template

10-24 x 0.375-

inch pan-head

Phillips screws (6)

Contents

Main Dell PowerApp.web 100 and PowerApp.cache 100 Appliances Rack Installation Guide Two-Post Center-Mount Rack Kit Installation Page Figure 2. Two-Post Open-Frame Relay Rack 1-U Hole Spacing Attaching the Brackets Figure 3. Securing the System in the Rack Installing the System in the Rack Two-Post Flush-Mount Rack Kit Installation Page Page Figure 5. Two-Post Open-Frame Relay Rack 1-U Hole Spacing Installing the Bracket in the Rack Figure 6. Installing the Bracket in the Rack Installing the Inner Rails on the System Chassis Figure 7. Securing the Inner Rails to the System Chassis Installing the System in the Rack Page Four-Post Rack Kit Installation Figure 9. Four-Post Rack Kit Contents Before You Begin Page Figure 10. Opening the 42-U Rack Door Figure 11. Removing the 42-U Rack Doors Removing the Doors From the 24-U Rack Page Figure 13. Removing the 24-U Rack Doors Installing the Slide Assemblies in the Rack Figure 14. One Rack Unit Figure 15. Using Template to Mark Vertical Rails Figure 16. Installing the Slide Assemblies Installing the Inner Rails on the System Chassis Figure 17. Installing the Inner Rails Installing the System in the Rack Figure 18. Installing the Computer in the Rack Installing the Cable-Management Arm Figure 19. Installing the Cable-Management Arm Replacing the Rack Doors Replacing the Rack Doors on a 42-U Rack Replacing the Rack Doors on a 24-U Rack