Manuals / Brands / Communications / Two-Way Radio / Windster / Communications / Two-Way Radio

Windster 100 Figure 19. Installing the Cable-Management Arm

1 24

Download 24 pages, 404.43 Kb

support.dell.com Dell PowerApp 100 Appliances Rack Installation Guide 23

Figure 19. Installing the Cable-Management Arm

2. Align the free end of the cable-management arm (the end with the pin and cap-

tive thumbscrew) to the back end of the right (or left) side inner rail (as viewed

from the back) of the computer.

3. Secure the cable-management arm to the inner rail with the captive thumbscrew

(see Figure19).

4. Attach the input/output (I/O) cables to their respective expansion cards on the

back of the PowerApp system.

5. Connect the remaining cables to the computer.

For details, see your system’s Troubleshooting Guide and the User’s Guide.

6. Secure the cables to the cable-management arm:

a. After connecting the cables to the computer, unscrew the thumbscrews that

secure the front of the server to the front vertical rail.

b. Slide the system forward to the fully extended position.

c. Route the cables along the cable-management arm, allowing some additional

cable slack at the hinge positions, and secure the cables to the

cable-management arm with the Velcro straps attached to the

cable-management arm.

captive

fastener

pin

Contents

Main Dell PowerApp.web 100 and PowerApp.cache 100 Appliances Rack Installation Guide Two-Post Center-Mount Rack Kit Installation Page Figure 2. Two-Post Open-Frame Relay Rack 1-U Hole Spacing Attaching the Brackets Figure 3. Securing the System in the Rack Installing the System in the Rack Two-Post Flush-Mount Rack Kit Installation Page Page Figure 5. Two-Post Open-Frame Relay Rack 1-U Hole Spacing Installing the Bracket in the Rack Figure 6. Installing the Bracket in the Rack Installing the Inner Rails on the System Chassis Figure 7. Securing the Inner Rails to the System Chassis Installing the System in the Rack Page Four-Post Rack Kit Installation Figure 9. Four-Post Rack Kit Contents Before You Begin Page Figure 10. Opening the 42-U Rack Door Figure 11. Removing the 42-U Rack Doors Removing the Doors From the 24-U Rack Page Figure 13. Removing the 24-U Rack Doors Installing the Slide Assemblies in the Rack Figure 14. One Rack Unit Figure 15. Using Template to Mark Vertical Rails Figure 16. Installing the Slide Assemblies Installing the Inner Rails on the System Chassis Figure 17. Installing the Inner Rails Installing the System in the Rack Figure 18. Installing the Computer in the Rack Installing the Cable-Management Arm Figure 19. Installing the Cable-Management Arm Replacing the Rack Doors Replacing the Rack Doors on a 42-U Rack Replacing the Rack Doors on a 24-U Rack