Manuals / WMF Americas / Kitchen Appliance / Coffeemaker

WMF Americas 1400 Button Allocation, Weigh Grounds, Boiler Temperature, Reset, Clock and Date

Models: 1400

1 64

Download 64 pages 23.21 Kb

Page 29

Button Allocation

Software

Quality 1 After pressing the coffee, grounds are given time to expand.

Quality 2 After pressing coffee is immediately brewed.

Quality 3 After pressing a pre-infusion follows.

Quality 4 After pressing and pre-infusion a second wet pressing follows.

Quality 5 After pressing a pre-infusion follows. In addition the brew time is automatically extended.

Attention!

Excessively high quality setting may lead to a brew water error.

Button Allocation

Each beverage is allocated to a beverage button.

This button allocation is set here.

Weigh Grounds

The Weigh Grounds process dispenses ground coffee directly into the grounds container. The grounds may then be weighed.

Empty grounds container prior to this procedure!

Boiler Temperature

 Set desired boiler temperature.
(Change brewing water temperature).
(Change brewing water temperature).	Boiler temp.
(Setting range 94° - 99° C)

Reset

Coffee machine software is restarted.

Clock and Date

Clock time and date are set here.

Language

Language used in the display is set here.

User Manual WMF presto

Reset

Clock / Date

Language

29

Image 29

WMF Americas 1400 Button Allocation, Weigh Grounds, Boiler Temperature, Reset, Clock and Date, Language, Software

Contents

01.02.001 Coffee machineIntroduction and General Congratulations on the purchase of your WMF Coffee MachineChapter Table of ContentsIntroduction OperatingCustomer Care Chapter 4 Other SettingsTable of Contents ChapterMaintenance Chapter 6 HACCP Cleaning ScheduleSafety Appendix B Technical Data1.1 Designation of Coffee Machine Parts Chapter 1 IntroductionIntroduction and General One Level Display1 Bean Hopper optional 1 or 2 Manual Insert model-dependent Introduction and GeneralRisk to User Risk to MachineHot Liquid Hot SurfaceGlossary Intermediate cleansingItalics Description of coffee machine state and/or explanation ofChapter 2 Operating 2.1 Switch On Coffee Machine2.2 Dispense Beverage 2.3 Dispense Milk or Foamed Milk optionalWarming Beverage 2.5 Steam Outlet optionalFoaming Milk Residues in steam dispenser tube are rinsed out2.7 Bean Hopper/Product Hopper 2.6 Adjust Combi Spout Height2.8 Manual Insert/Tablet Insert Tablet insert is usedOperation 2.9 Coffee Grounds Container2.10 Countertop Coffee Grounds Container optional Operation 2.12 Switch Off Coffee Machine2.11 Drip Tray 3.1 Overview Chapter 3 SoftwareReadiness State Readiness State Display Touch PadsMenu Control Pads Functions Touch Pads Main MenuSoftware Milk and Foam3.2 Readiness State Service3.2.1 Hot Rinse 3.2.2 Barista PadAccess Main Menu TimerBrew Times Journal3.3 Main Menu 3.3.2 Timer Program3.3.1 Milk and Foam Milk Foam Quality Latte Macchiato Pause IntervalSet Timer Timer StateActivate/deactivate timer To set on/off timesTimer Delete Timer OverviewThe day is deleted with all its timer events Copy DayTouching Timer Info accesses a display with the next timer event Timer InfoTimer Info SoftwareSoftware Cleaning program3.3.3 Customer Care Foamer cleaning starts Foamer CleaningMixer Rinsing DescalingPreparation Stage Descaling with Water TankDescaling Stage Descaling commences. Duration approx. 40 minsDescaling starts. Duration approx. 40 mins Descaling with Constant Water SupplySubsequent rinses are from the mains supply SoftwareRinse Filter Filter ChangeCustomer Check-up SoftwareCup Volumes 3.3.4 Setting Recipes and Beverage ButtonChange Recipes All BeveragesReset Boiler TemperatureButton Allocation Weigh GroundsRecommended setting active Contrast of the display is set here. Default value isDisplay Contrast Filter/Softener FittedLevel Cleaning 3.3.6 PIN Rights Access ControlLevel Settings 3.3.5 Enter PINDelete PIN Level AccountingNumerical keyboard display appears This level is now PIN-protectedRead Counter 3.3.7 Accounting Unit StatisticDelete Counter Software4.1 Mechanical Settings Chapter 4 Other SettingsOther Settings Preset grind level now visibleChapter 5 Customer Care Cleaning Interval ScheduleSee Quick Reference “Daily Cleaning” See “General Cleaning” See “Weekly Cleaning” See “Regular Cleaning” See Software - Customer Care5.1.1 Cleaning program 5.1 Daily Cleaning5.1.2 Foamer Cleaning 5.1.4 Combi Spout Cleaning5.2.1 Brewing unit cleaning 5.2 Weekly CleaningDrip Tray, Housing and Front Panel cleaning Metal surfaces cleaningNever use force Reinstall the dry brewing unit Remove residual coffee grounds using a paint-brush or scrubber Customer CareCustomer Care 5.2.2 Choc/Topping Mixer Cleaning optional5.2.3 Milk Compartment Cleaning 5.2.4 Water Tank Cleaning 5.3 Regular Cleaning5.3.1 Bean Hoppers Cleaning Customer Care5.4 Filter Changing 5.3.2 Product Hopper Cleaning Choc/Topping optional5.5 Descaling Customer CareHACCP Cleaning Schedule Chapter 6 HACCP Cleaning ScheduleSterilize the Milk System daily Keep milk coolHACCP Cleaning Schedule Recommendation for Choc/Topping optionalHACCP Cleaning Schedule HACCP Cleaning RoutineCleaning steps 2b.Daily Mixer Cleaning. Brief guide “Daily Cleaning”Servicing Chapter 7 Maintenance7.1 Coffee Machine Maintenance 7.3 Mixer Maintenance Topping 7.2 Mixer Maintenance Choc7.4 WMF Customer Service ServicingChapter 8 Messages and Tips Brew Fault8.1 Operating Messages Messages and TipsChange anti-scale filter 8.2 Error/Fault MessagesPlease check in User Manual Descaling Message Touch pad Fault numbers are displayedMessages and Tips Messages and Tips  Switch off machine, allow to cool and switch on Lightly smear O-rings with WMF Sealing Grease 8.3 Faults with no DisplayMessages and Tips 9.1 Hazards for the User Chapter 9 SafetyScald Hazard Burn HazardHealth hazard 9.2 Danger to the MachineHealth Hazard Irritation and Scald HazardSafety 9.4 Warranty Claims9.3 Responsibilities of the Operator Warranty No Warranty is providedAppendix Quick Reference Overview Appendix A Quick Reference OverviewQuick Reference Installation Instructions When adjusting height of combi spout, hose must not be stretchedOverview Quick ReferenceQuick Reference “Daily Cleaning” Foamer CleaningCoffee Machine Technical Data Appendix B Technical DataTerms and Conditions of Use and Installation Appendix Technical Datamachine should be installed with clearance of not Appendix Technical Dataded height of the working surface is a minimum of If the machine connections are to be routed downAppendix Accessories and Spares Appendix C Accessories and SparesAppendix Accessories and Spares Index Table of Contents Tablet Insert Timer Delete Timer Info X Y ZTimer Overview Timer Program Timer State Toggle Pad Warming Beverage Warm Rinse Water volume Weigh GroundsYour nearest WMF Customer Service Centre Subject to technical modification