48 Chapter 4
SSH
Use the SSH Configuration dialog box (click SSH) to set SSH connection configurations.
After configuring, be sure to click OK.
TIP: X forwarding/tunneling is automatic and allows you to execute remote X applications.

Network

Use the Network tab to configure the network settings:
Description - Enter a name/label for the connection.
Host - Enter a host name or IP address.
Remote Username - Enter a username.
Remote Command - Enter the command to execute on the server.

Connection

Use the Connection tab to configure the connection settings:
Auto Connect - Starts the connection automatically after system startup.
Ping Before Connect - Pings the connection to see if it is reachable before the
connection is attempted.
Auto Reconnect - Reconnects automatically after a disconnection occurs.
Delay before retrying - Select the amount of time to delay the reconnection attempt
after a disconnection occurs.