52 | Chapter 4 |
Web Browser
Use the Web Browser Configuration dialog box (click Web Browser) to set Web Browser connection configurations. After configuring, be sure to click OK.
Network
Use the Network tab to configure the description and URL (optional if you want the browser to open to a particular Web page each time you connect). If you want the browser to launch automatically after system startup, select the Auto Connect check box.
Window
Use the Window tab to configure how the browser window is displayed. If you want the browser to appear in fullscreen mode without any menus or toolbars, select Kiosk Mode. If you want the browser to appear without the panel while using the connection, select Disable Panel. If you are not using Kiosk Mode, you can select the Window Size you want from the list.
Auto Reconnect
Use the Auto Reconnect tab to enable automatic reconnect after a disconnection (select the Enable Auto Reconnect check box, and then select the amount of time to delay the reconnection attempt after a disconnection occurs).
