Code Compliance
Code Compliance
Governing installation codes vary depending on the location and type of installation. Electrical installations must meet local and national wiring codes. Installations of this equipment should only be performed by skilled personnel such as qualified electricians and Certified Renewable Energy (RE) System Installers. For a list of Xantrex Certified RE dealers, please visit our website at www.XantrexREdealers.com.
Important: Be sure to obtain the appropriate permits, if necessary, prior to starting this installation.
Installation Tools and Materials
Tools Required
Hardware / Materials Required
The following tools may be required for installing this equipment.
❐Wire strippers
❐Assorted
❐Torque wrench
❐Electrical tape
❐Multi meter (AC/DC volts, frequency)
❐Assorted Phillips screw drivers
❐3/16" Allen/Hex head driver
❐Slotted screw driver
❐Level
❐Pencil
❐Utility knife
The following materials may be required for completing this installation.
❐Conduits, bushings, and appropriate fittings for wire runs
❐Wire nuts
❐Electrical wire of appropriate size and length
❐Breaker Panels
❐Ground busses, bars, and/or rods
❐Six #10 wood screws or ¼ inch (6 mm) lag bolts and washers.