Pre-installation

Knockout Locations for four additional circuit breakers

Figure 1-6Knockouts on ACCB Top Cover for Additional Circuit

Breakers

Accessory Cable Slots

Two slots on the top and bottom of the ACCB base are provided to route the cables for the Inverter Stacking Cable - Series (ISC-S) and the remote Inverter Control Module (ICM) if used. These slots are covered by small hole plugs if these accessories are not used.

If your configuration will include the use of the ISC-S or remote ICM accessories, then determine which slot(s) will be needed and remove the hole plug(s) for that slot only. Do not remove any hole plugs from slots that will not be used.

975-0046-01-01

1–9