WARNING
Ensure that no DC voltage is being supplied to the inverter and that no AC voltage is present on the AC wiring. Failure to do so could cause serious injury or death.
Location
Be sure to allow sufficient space for the ACCB to be mounted directly adjacent to the inverter’s AC side. Also consider the additional weight and ventilation space requirements of the ACCB.
Ventilation Requirements
Minimum clearance for ventilation around ACCB must be at least
6 inches (152 mm) at the end and at the top. The minimum clearance is needed to prevent recirculating hot air from the inverter’s exhaust (DC side) from going back into the inverter’s intake (AC side).
For maximum ventilation, 12 inches (305 mm) is recommended around the top.
Please refer to the Sine Wave Plus Inverter/Charger Owner’s Guide for additional location considerations.
12" (305 mm) | 6" (152 mm) |
Recommended | Minimum Required |
|
|
6" (152 mm) 
Minimum Required
SetInve ter
OFF SRCH ON CHG
AC Conduit Box | Sine Wave Plus Inverter / Charger |
ON | O N |
D
OFFOFF
Figure