![DIN Rail Mount](/images/new-backgrounds/54430/5443061x1.webp)
Mounting the Conext ComBox
DIN Rail Mount
A standard
To mount the Conext ComBox on the DIN Rail:
1.Choose the location for mounting the device.
2.Using heavy duty scissors or a diagonal cutter, cut both ends of the side tab on one end of the Conext ComBox.
Side tab
3.Break off the side tab. You may need to use pliers for this.
4.Repeat steps 2 and 3 for the tab at the other end of the Conext ComBox.
5.Use a suitable tool, such as a screwdriver, to pull down the catch on the bottom of the Conext ComBox.
6.Mount the Conext ComBox on the DIN rail and release the catch. See the following illustration.
DIN rail catch
7. Connect the wiring and cables.