Configuration
Click | and a physical indicator on the device will flash, light up, or |
beep depending on the device. | |
• Click | to make sure you view the latest information. |
•Enter the new address for the device in the address box. Do not use an address that is already reserved.
•Click Submit to save the address change.
To reset all of the device Modbus addresses to their default values:
uIn Modbus Address List, click Reset Addresses.
Modbus Address Enumeration
Note: Modbus support is available only for the Conext ComBox (Part Number
The Modbus Address Enumeration option available with this Conext ComBox – Freedom SW (Part Number 809- 0918), is not required for operation or supported by Xantrex technical support.
Use this setting to change the initial starting Modbus addresses for device types. The Conext ComBox automatically assigns starting addresses when it is installed but the starting values can be changed as you wish.