Xantrex Technology Freedom SW Series manual Changing the Time, Physical Injury Hazard

Changing the Time

Changing the Time

WARNING

PHYSICAL INJURY HAZARD

Be careful when changing the Conext ComBox time setting. It will override any time settings on individual Xanbus-enabled devices in the network. The time represents the entire system. Any appliance or equipment that is time- controlled by a Xanbus device, such as a generator connected to an AGS, can inadvertently turn on at the wrong time.

Failure to follow these instructions can result in death or serious injury.

You can also choose to use the network time for your system. If enabled, network time (SNTP) will override the Conext ComBox Time setting at the next SNTP

polling update. See “Using Network Time” on page 3–8.The default setting has SNTP network time enabled (SNTP state is On).

Note: This date/time setting overrides settings on other devices in the system.

To set the Conext ComBox time and date:

1. On the Home screen, click to display the Basic Settings control panel.

2. Click Time & Zone and then select the appropriate values. Click Submit.

975-0704-01-01 Revision A 3–7