Xantrex Technology Freedom SW Series manual Conext ComBox Setup Buttons

Overview

Closes the Conext ComBox web user interface and logs out.

Shows Xanbus Devices of all types in the network.

Shows the battery status for the network.

Shows system AC output power, voltage and current (loads).

Shows the status of AC shore power from the public utility grid.

This feature is reserved for future use. A Xanbus enabled solar charge controller certified for use on a vehicle or boat is not currently available.

Displays the status of generator input energy.

Conext ComBox Setup Buttons

These buttons are found in the Conext ComBox Setup screen.

Item	Description
	Saves a parameter’s new value to the Conext ComBox.

Recalls (or refreshes) a parameter’s previous value that is still not saved (or that may have been changed by another device).

Found in E-mail-related settings, the Conext ComBox sends information out via the e-mail system.

Found only in the Network Time (SNTP) setting, this button performs a manual network time synchronization.

Found only in General Settings, this button reboots the Conext

ComBox.

Found only in General Settings, this button shuts down the Conext

ComBox.

Captures the most up-to-date value from a parameter.

Sets the time and date in the Conext ComBox.

1–12 975-0704-01-01 Revision A