Xantrex Technology Freedom SW Series manual Configuration

Configuration

E-mail Server Address	Specify the mail server address
	provided by the Internet service
	provider. It has the format
	mailserver.yourdomain.com. Contact
	your Internet service provider for the
	correct information.
E-mail Server Port	Specify the port number used by a
	computer to transmit electronic data
	through the Internet. The number 25 is
	typically reserved for e-mail.
E-mail Recipients	Enter multiple e-mail addresses
	separated by a comma and no space.
	Any address listed here will receive e-
	mail messages generated by the
	Conext ComBox.
E-mail Authentication	Enable or disable an external e-mail’s
	authentication settings. When enabled,
	you have to supply the E-mail User ID
	and E-mail Password below.
E-mail User ID	Specify the external e-mail account’s
	user ID, which is usually the full e-mail
	address that includes the domain
	name.
E-mail Password	Specify the external e-mail account’s
	password.
Lost Password E-Mail Recipients	Specify a valid e-mail address where
	the current password or a random
	temporary password can be sent.
	For multiple e-mail recipients, separate
	the addresses with a comma and no
	space.
Lost Password E-Mail From Address	Specify a valid e-mail address that can
	be used as an identifier of the sender.
	Generally, the sender is also the user of
	the Conext ComBox.
	By default, this is set to no-
	reply@schneider-electric.com and
	typically does not need to be changed.
Reset Lost Passwords	Select No to send the current
	password by e-mail.
	Select Yes to generate a random
	temporary password to be sent by
	e-mail.

3–10 975-0704-01-01 Revision A