Xantrex Technology PS2.5, PS3.0 Charger Information Menu, STATE:, CHARGER, CHARGER, OVERRIDE, CHARGER STATE OF, EQUALIZE IS NOW:, EQUALIZE IS NOW:, SELECT FROM: CHARGER, Table 1:

Section 2: Controls and Indicators

Charger Information Menu

The Charger menu displays the charging status and enables you to determine if an equalization request is enabled. A charger override request is also available at this menu.

SELECT FROM: CHARGER

ENTER

CHARGER

STATE:CHARGER STATE OF

ENTER

EQUALIZE IS NOW:

EQUALIZE IS NOW:

OVERRIDE

CHARGER

Table 1: Charger Status
	STAGE	DESCRIPTION
	Not Charging	Charger has been disabled or is on standby.
	Bulk Charging	The first phase of the three-phase charging cycle has started.
	Absorption Charging	Bulk charging has completed and the second phase of the
		charging cycle has begun.
	Float Charging	Absorption charging has completed and the charger is
		‘topping-off’ and maintaining the batteries.
	Equalization	The charger has started the special “equalization” stage.

See “Section 6: Multistage Charging” (page 59) for a detailed description of the charging regime, and a discussion of equalization in general. See “ACS Configuration‚” on page 28 for detailed instructions on setting configuration parameters using the ACS panel.

See “ACS Configuration‚” on page 28 for details on the Equalization Request and Override Charger Operating Mode procedure.

Prosine 2.5/3.0 Installation & Operation Guide 17