![](/images/new-backgrounds/1124373/12437341x1.webp)
Packaging contents
The packaging contains the items listed below:
Multifunction device
1 print cartridge
1 Safety guide and 1 Installation guide
1 PC installation CD ROM
1 power cord
1 USB cord
| Phaser 3100MFP/S |
| ||
Device installation |
| Installation- | ||
1 | Unpack the device. | |||
| ||||
2 | Install the device adhering to the security notices |
| ||
| stated at the beginning of this booklet. |
| ||
3 | Remove all tape from the machine. |
| ||
4 | Remove the plastic protection film from the screen. |
| ||
Paper tray installation |
| 2 |
Before loading paper, refer to the Important paragraph Paper
recommendations, page 13.
Your machine supports a number of sizes and types of media (refer to Specifications, page 50).
Important | You can use paper weighing | |
between 60 and 105 g/m2. | ||
|
1Remove the paper tray completely.
2Push the lower panel down until it clicks.
3Setup the back side tray stop by pushing the "PUSH" level (A).
Then adjust the side paper guides to the paper size by pushing lever (B) located on the left side guide. Adjust the length paper guide to the paper size by
- 17 -