Xerox 3100MFP/S manual Companion Monitor, Device management, Selecting the current device

Models: 3100MFP/S

1 56
Download 56 pages 57.93 Kb
Page 46
Image 46

Phaser 3100MFP/S

Companion Monitor

Graphical presentation

Run the application by clicking on the XEROX COMPANION MONITOR icon located on your desktop or from the menu

START >ALLPROGRAMS > XEROX COMPANION SUITE > PHASER 3100 MFP > COMPANION MONITOR.

From this screen you can monitor the information or configure your machine from the tabs:

DEVICE SELECTION: Displays the list of devices managed by the PC.

COMPANION: Presents the machine screen (USB connection only).

CONSUMABLES: Displays the consumables status.

Device management

This tab shows the list of devices managed by the PC.

Selecting the current device

Only one device at a time may be connected to the PC. The current device may be selected by clicking on the radio button corresponding to the device.

Status of the connection

Features

The status of the connection between the current device

 

and the PC is indicated by a colour. The following table

 

defines the possible states of the connection.

 

 

 

 

 

 

 

Colour

State

 

PC-

 

 

 

 

 

 

 

 

 

Yellow

Connection in progress.

 

 

 

 

 

 

 

 

8

 

Green

Connection established.

 

 

 

 

 

 

 

 

 

 

 

Red

The PC cannot connect to the device.

 

 

 

Check the USB connection.

 

 

 

 

 

 

 

 

 

 

 

Device parameters

1Select a device by clicking on its line in the list and click on PROPERTIES to configure the scanning parameters to be applied for this device when you use the SCAN TO function.

2Select the desired scan MODE in the drop-down menu.

- 42 -

Page 46
Image 46
Xerox 3100MFP/S manual Companion Monitor, Device management, Selecting the current device, Status of the connection