Xerox 3100MFP/S manual Installing drivers only

Phaser 3100MFP/S

The installation is launched.

The following screen appears to indicate the progression of the installation.

6Click on OK to finish the installation.

Your Xerox Companion Suite kit is successfully installed on your PC.

You can now connect your machine, refer to paragraph Connections, page 39.

You can start the machine's management software from the menu START > ALL PROGRAMS > XEROX COMPANION

SUITE > PHASER 3100 MFP > COMPANION DIRECTOR or by clicking on the icon XEROX COMPANION DIRECTOR located on your desktop.

Installing drivers only

This section describes the following installation procedures:

•installation of drivers using the Xerox Companion Suite software,

•manual installation of drivers.

Installing the drivers using the Xerox Companion Suite software

Turn your PC on and log in as administrator.

1Open the CD-ROM drive, insert the installation CD- ROM and close the drive.

2An installation procedure is automatically run (Auto run). If it does not, double-click on setup.exe at the CD-ROM's root.

3A screen titled XEROX COMPANION SUITE appears. This screen allows you to install and uninstall the software, access the product's user guides or browse the CD-ROM contents.

4Place your cursor on INSTALL PRODUCTS and confirm with left-click of the mouse.

5The Products Installation screen appears.

Place your cursor on CUSTOMIZED and confirm by left-click with the mouse.

8 - PC Features

- 37 -