Phaser 3100MFP/S
pushing lever (C).
4Take a paper stack, pull the paper off and align it on a flat surface.
5Put the paper stack in the tray (200 sheets of 80 g/ m² paper for instance).
6Slide the tray back in its location.
Print cartridge installation
1Stand in front of the machine.
2Grasp the left and right sides of the cover and pull it towards you at the same time.
3Unpack the new print cartridge. Gently roll the cartridge 5 or 6 times to distribute the toner evenly inside the cartridge. Thoroughly rolling the cartridge will assure the maximum copies per cartridge.
Hold it by its handle.
4Insert the cartridge in its slot by pushing it until it clicks, then gently push the handle down (as shown below).
5Close the cover.
Output Support Tab
Adjust the paper output support tab depending on the size of the document to be printed. Do not forget to raise the flap to prevent output sheets from falling out of the machine.
- 18 -
