Xerox 4510 manual Loading Paper Guidelines

Loading Paper

Loading Paper

This section includes:

■Loading Paper Guidelines on page 3-7

■Loading Paper in Tray 1 on page 3-8

■Loading Paper in Tray 2, 3, or 4 on page 3-12

■Tray 1 Mode and Tray 2-N Mode on page 3-17

Loading Paper Guidelines

After loading any tray and adjusting the paper guides, set the paper type and size as required at the control panel. All trays require control panel settings for both paper type and size.

■Do not overload the paper tray. See the tray label for the maximum fill line indicators.

1

2

3

4510-043 4510-151

Tray 1 Trays 2-4

Top fill line - Maximum fill line for paper.

Lower fill line - Maximum fill line for transparencies and envelopes.

1 - Maximum fill line for paper.

2 - Maximum fill line for envelopes.

3 - Maximum fill line for transparencies.

■If excessive jams occur, turn the paper or media over. If jams continue to occur, use paper, transparencies, or other specialty media from a new package.

■Use only paper envelopes. Do not use envelopes with plastic windows or metal clasps.

■Only use paper, transparencies, or specialty media that is flat. If frequent jamming occurs with card stock or heavier paper that is less than 175 mm (7 in.) long, reduce the number of sheets in the tray.

Phaser® 4510 Laser Printer

3-7